Description
SpaGuard Balance Pak 100 raises the total alkalinity in hot tub water, which helps to prevent pH fluctuation. Alkalinity changes occur naturally in hot tubs, making this a commonly required product. A low total alkalinity can cause spa water to become corrosive, which can lead to skin irritation and damaged hot tub equipment. Balance Pak 100 is a finely ground granular and completely soluble. It won’t leave behind biproducts that cause cloudy water.
Available Size: 1kg
How to Use Balance Pak 100
- 18g, or 2 tsp, of Balance Pak 100 will raise the alkalinity of 1,000L of hot tub water by 10ppm
- Add directly to the hot tub and let the jets run for at least 15 minutes
DO NOT APPLY BALANCE PAK 100 WHEN PEOPLE ARE IN THE HOT TUB
Wait 15 minutes after applying Balance Pak 100 to use the hot tub
Tips for Using Balance Pak 100
- The alkalinity in your hot tub will continually go down, we recommend adding Balance Pak 100 once per week
- If your alkalinity is below 40, we recommend you bring a water sample to the store. We will do a comprehensive water analysis to ensure there’s nothing else that could cause future problems.
Complimentary Products
Make sure you are getting an accurate reading of your alkalinity with either Bromine Test Strips or Chlorine Test Strips.