Description
This smaller sized hot tub jet is compatible with tubs that have “snap-in” fittings including Beachcomber Hot Tubs from 1999 to the present day. This motion massage jet offers a rotating action as it spins vigorously. You can also adjust the jet pressure by opening and closing the jet with a ¼ turn clockwise (to close) or counter clockwise (to open). Measures 2 5/8” across the face. Colour/Finish: Grey Plastic
Other Compatible Jet Options:
Size Comparison Guide:
AJ – 2”-2 ¼” across the face, small
E1 – 3”-3 ¼” across the face, medium
E2 – 3.5” across the face, large
E3 – 5”- 5 ¼” across the face, extra large
RFM – 5”- 5 ¼“ across the face, extra large
Neck Jet Grey – 2 5/8” across the face
Neck Jet Britewerx – 3 ¼” across the face
Tip:
It is highly recommended to purchase a neck jet nozzle with your neck jet as a worn or incompatible neck jet nozzle will prevent your new neck jet from functioning correctly.
To remove, twist counter-clockwise until the jet spins freely with no resistance. Then use a butter knife or screw driver to carefully pry the jet forward until you hear it pop (use a soft cloth on the hot tub shell to prevent scratches). Remove the jet and the neck jet nozzle behind it. If the nozzle does not come out, use plyers or the neck jet wrench to remove it. To install, place the neck jet face down, insert the neck jet nozzle in the hexagon fitting behind the neck jet and turn the nozzle threads counter-clockwise until the threads are covering 1 of the 2 o-rings on the nozzle. Take the neck jet with the nozzle together and pop them into the vacant hot fitting. Turn clockwise to tighten until the jet feels snug and stops turning. Check for the ¼ turn open and close motion to verify the jet is installed correctly. If it is not, repeat the process or try using the neck jet wrench to install the nozzle first, then snap-in the neck jet.
Please contact us prior to purchasing your jets if you have any questions so we can help you select the correct ones.