FREE SHIPPING for orders above $299 to most of Ontario *Restrictions applyshop now
FREE SHIPPING for orders above $150 within the GTA and selected postal codes *Restrictions applyshop now
FREE SHIPPING to Ontario, Manitoba, and Quebec for selected itemsshop now
In-store and curbside pickup orders conveniently available in 60 minutes of being placed during business hours.Shop Now
Jet RFM Snap-In Britewerx

Your 10% Staycation Summer Sale discount will be applied at checkout.

Jet RFM Snap-In Britewerx

SKU 3002334 Categories , , Tag

$5199

Hot tub jet compatible with tubs that have “snap-in” RFM floor fittings including Beachcomber Hot Tubs from 2004 – 2014 (serial codes beginning with letters F to Q).

Shipping Info

Free shipping on orders over $299 + hst to most of Ontario or over $150 + hst to the GTA and some surrounding areas

In stock

This product is currently on backorder. We will contact you immediately once your backorder arrives.

Jet RFM Snap-In Britewerx

SKU 3002334 Categories , , Tag

Hot tub jet compatible with tubs that have “snap-in” RFM floor fittings including Beachcomber Hot Tubs from 2004 – 2014 (serial codes beginning with letters F to Q).

Shipping Info

Free shipping on orders over $299 + hst to most of Ontario or over $150 + hst to the GTA and some surrounding areas

$5199

In stock

This product is currently on backorder. We will contact you immediately once your backorder arrives.

Description

This extra-large hot tub jet is compatible with tubs that have “snap-in” RFM floor fittings including Beachcomber Hot Tubs from 2004 – 2014 (serial codes beginning with letters F to Q). These Reflex Foot Massage jets are extremely powerful and deliver a deep tissue massage to your feet. The directional nozzle is adjustable to customize the position. Measures 5 ¼” across the face. Colour/Finish: Stainless Steel/Chrome

 

Other Compatible Jet Options:

 

Note: This jet is not compatible or interchangeable with the E3 series 5”- 5 ¼” jets or the RFM Thread-in Pre 2003 Grey jet.

 

Size Comparison Guide:

AJ – 2”-2 ¼” across the face, small

E1 – 3”-3 ¼” across the face, medium

E2 – 3.5” across the face, large

E3 – 5”- 5 ¼” across the face, extra large

RFM – 5”- 5 ¼“ across the face, extra large

Neck Jet Grey – 2 5/8” across the face

Neck Jet Britewerx – 3 ¼” across the face

 

Tip:

To remove, apply force to turn the jet counter-clockwise until the jet unlocks and pops forward. Do not pull the jet out until it is unlocked. To install, line up the jet tab (black on the face underside) to the small channeled groove found in the red ring, then push forward until you hear/feel it snap and lock in. Check for a little left/right wiggle movement in the jet to verify it is installed correctly. These jets to not open and close like others in the hot tub. Always ensure the old jet is completely removed before installing the new one. If the old jet separates during removal where only the face comes out of the fitting, remove the 2 phillips screws on the red ring in the floor fitting and remove the red ring but remember it’s orientation. With the ring removed, you can twist or pull the remaining part of the old jet out of the floor fitting, then reinstall the red ring in the same orientation it was found. Then install the new jet. Always install the correct insert (included) inside the jet before installing the jet in the hot tub or the air will not pass through the jet properly. Use your old jet to reference which insert your should be using.

 

Please contact us prior to purchasing your jets if you have any questions so we can help you select the correct ones.

Learn more about hot tub jets here

Lakeshore Pools & Hot Tubs

Newsletter

Newsletter Popup

Request More Information

You may also call us at:
(905) 891-8818