Description

This large sized hot tub jet is compatible with older tubs that have “thread-in” fittings including Beachcomber Hot Tubs from 2001 and prior (serial codes beginning with letters A to B or serial codes with only numbers). This motion massage jet offers a pulsating action as it rotates pressure over the 7 jet holes. You can adjust the jet pressure by opening and closing the jet with a ¼ turn clockwise (to close) or counter clockwise (to open). Measures 3.5” across the face. Colour/Finish: Grey Plastic

Other Compatible Jet Options:

• None

Note: This jet is not compatible or interchangeable with the E2 Thread-in Pre 2001 Roto Grey jet or the E2 Thread-in Pre 2001 Directional jet.

Size Comparison Guide:

AJ – 2”-2 ¼” across the face, small

E1 – 3”-3 ¼” across the face, medium

E2 – 3.5” across the face, large

E3 – 5”- 5 ¼” across the face, extra large

RFM – 5”- 5 ¼“ across the face, extra large

Neck Jet Grey – 2 5/8” across the face

Neck Jet Britewerx – 3 ¼” across the face

Tip:

To remove, put your fingers behind the face of the old jet in the hot tub and gently wiggle the jet face towards you so it slides forward about 1”. With the face extended away from the tub, grab the jet face and twist it counter-clockwise a few rotations until the jet can be removed freely. To install, start by pushing the face forward 1” like when the old jet was removed. Push the center of the new jet into the fitting using your thumbs and rotate the jet clockwise spinning a few times until it is snug. Push the face forward so it is flush to the tub. Check for the ¼ turn open and close motion to verify the jet is installed correctly. Always ensure the old jet is completely removed before installing the new one. If the old jet separates during removal where only the face comes out of the fitting, use needle nose plyers to rotate the remaining part of the old jet counter-clockwise until it can be removed. Then install the new jet.

Please contact us prior to purchasing your jets if you have any questions so we can help you select the correct ones.

Learn more about hot tub jets here