This medium sized hot tub jet is compatible with tubs that have “snap-in” fittings including Beachcomber Hot Tubs from November 2000 – December 2010 (serial codes beginning with letters B to L). This motion massage jet offers a pulsating action as it rotates pressure over the 3 jet holes. You can adjust the jet pressure by opening and closing the jet with a ¼ turn clockwise (to close) or counter clockwise (to open). Measures 3 ¼” across the face. Colour/Finish: Stainless Steel/Chrome
This jet is discontinued by the manufacture, limited stock available.
Other Compatible Jet Options:
- Jet E1 Snap-in Twin Roto Britewerx
- Jet E1 Snap-in Vortex Grey
- Jet E1 Snap-in Roto Grey
- Jet E1 Snap-in Massage Grey
- Jet E1 Snap-in Directional Generic
Note: This jet is not compatible or interchangeable with the Neck Jet Britewerx.
Size Comparison Guide:
AJ – 2”-2 ¼” across the face, small
E1 – 3”-3 ¼” across the face, medium
E2 – 3.5” across the face, large
E3 – 5”- 5 ¼” across the face, extra large
RFM – 5”- 5 ¼“ across the face, extra large
Neck Jet Grey – 2 5/8” across the face
Neck Jet Britewerx – 3 ¼” across the face
To remove, twist counter-clockwise about ¼ turn until it stops (jet is now in the open position). Then apply additional force to keep turning until the jet unlocks and pops forward. Do not pull the jet out until it is unlocked. To install, line up the jet tab (black on the face underside) to the channeled groove in the hot tub wall fitting, then push forward until you hear/feel it snap and lock in. Check for the ¼ turn open and close motion to verify the jet is installed correctly. Always ensure the old jet is completely removed before installing the new one.
Please contact us prior to purchasing your jets if you have any questions so we can help you select the correct ones.