Description

BioGuard Stabilizer 100 is a granular stabilizer designed to be added to the pool to prevent chlorine from being stolen by the sun. It will increase the amount of time free chlorine stays in the water which means you use less chlorine overall. Additionally, it allows the present chlorine to do its job more effectively. Stabilizer 100 is applied slowly through the skimmer.

Available sizes: 750g, 2.5kg

How to Use:

1. Backwash filter if you have a sand filter or check your cartridge filter for adequate pressure
2. Empty pump basket and skimmer basket
3. Add up to 300g of Stabilizer 100 per 10,000L of pool water
4. Pour Stabilizer 100 very slowly through the skimmer with the basket in place. You want to avoid it clumping in the pipes
   1. If you have non-plastic pipes, broadcast Stabilizer 100 over the pool and brush undissolved product from the bottom of the pool
5. Let the pump run continuously for 48 hours after adding Stabilizer 100
   1. Do not backwash or clean filter for 48 hours
6. If you need more than the maximum dosage of Stabilizer 100, repeat the process

DO NOT APPLY STABILIZER 100 WHEN SWIMMERS ARE IN THE POOL
Wait 15 minutes after applying Stabilizer 100 to go swimming

Tips for Using Stabilizer 100

• Stabilizer can take up to 1 week from application to appear on your water test
• It is very important to add Stabilizer 100 slowly to the skimmer, so it does not clump in your pipes

Complimentary Products

• Make sure you are getting an accurate reading of your stabilizer with Chlorine Test Strips.