Description

The Beachcomber SST-2 Circuit Board ensures reliable automation and seamless control of your hot tub system for enhanced performance and convenience. Built for durability, this essential component supports features like temperature regulation and filtration, simplifying hot tub maintenance and improving functionality

Genuine Beachcomber Part, brand new direct from Beachcomber Hot Tubs. Aftermarket circuit boards may not have the same programming which could affect the hot tub functions. Please call us for assistance if you have any questions, we want you to feel confident you are getting the right part and that it will work on your hot tub exactly as it should.

Installation Tips:

1. Turn the power off at the electrical breaker, never work on circuit board while it has power.
2. It is recommended that you take a photo of the old circuit board prior to removing any wires or connections so you can reference that photo during the new circuit board installation.
3. Check that the dipswitches on the new circuit board (found on the red and blue box at the bottom with white switches) are set to the same position as the old circuit board.
4. Make sure the copper heater leads and terminal wires (White, Black, Red) are fastened tightly. Consider checking that the white, black, red terminal wires are all properly clamped by giving them a pull, if the wire moves or slips out it was not installed correctly in the terminal block.
5. Always turn the main power off prior to removing the plastic box cover that protects the circuit board and replace that cover before turning the power on.